Q1 Journals:

1. Surakasi, R. T., et al. (2022). Water removal from an ethanol–water mixture at azeotropic condition by adsorption technique. Adsorption Science & Technology, 40, 1–14.
https://doi.org/10.1177/02636174221084161

2. Surakasi, R. T., et al. (2022). Synthesis and characterization of TiO₂–water nanofluids. Adsorption Science & Technology, 40, 1–12.
https://doi.org/10.1177/02636174221084918

3. Surakasi, R. T., et al. (2022). An approach to the utilization of grid integration to analyze the performance and quality of solar photovoltaic model. Energy Reports, 8, 11209–11219.
https://doi.org/10.1016/j.egyr.2022.08.145

4. Surakasi, R. T., et al. (2022). Waste to fuel: Pyrolysis of waste transformer oil and its evaluation as alternative fuel with nanoparticles in a CI engine using exhaust gas recirculation. Energy, 257, 124792.
https://doi.org/10.1016/j.energy.2022.124792

5. Surakasi, R. T., et al. (2023). Experimental study on the treatment of urban garment industry wastewater to mitigate groundwater contamination using a solar evaporative still. Urban Climate, 48, 101387.
https://doi.org/10.1016/j.uclim.2023.101387

6. Surakasi, R. T., et al. (2023). Graphene nanopowder and propylene glycol solutions: Thermal and physical properties. Arabian Journal for Science and Engineering, 48, 9141–9154.
https://doi.org/10.1007/s13369-023-07812-5

7. Surakasi, R. T., et al. (2023). Elimination of toxic dye using bio-synthesized cerium oxide nanoparticles derived from Morinda citrifolia leaf extracts. Surfaces and Interfaces, 38, 102791. https://doi.org/10.1016/j.surfin.2023.102791

8. Surakasi, R. T., et al. (2023). Tanning wastewater sterilization in dark and sunlight using Psidium guajava leaf-derived copper oxide nanoparticles. ACS Omega, 8(41), 38112–38125.
https://doi.org/10.1021/acsomega.3c04521

9. Surakasi, R. T., et al. (2024). Performance, combustion, and emission analysis of diesel engine fuelled with pyrolysis oil blends: RSM optimization and ML modeling. Journal of Cleaner Production, 418, 139932. https://doi.org/10.1016/j.jclepro.2023.139932

10. Surakasi, R. T., et al. (2024). DeepNNet-15 for prediction of biological waste-to-energy conversion and nutrient level detection in treated sewage water. Process Safety and Environmental Protection, 184, 148–161.
https://doi.org/10.1016/j.psep.2024.07.021

11. Surakasi, R. T., et al. (2025). Optimization of viscosity of propylene glycol–water (50:50)/graphene nanofluid using response surface methodology and machine learning. Results in Engineering, 16, 100902. https://doi.org/10.1016/j.rineng.2025.100902

Q2 Journals:

1. Surakasi, R. T., (2020). Ethylene glycol-based nanofluids: Estimation of stability and thermophysical properties. Frontiers in Heat and Mass Transfer, 14, 24. https://doi.org/10.5098/hmt.14.24

2. Surakasi, R. T., (2021). Stability and thermo-physical properties of ethylene glycol-based nanofluids for solar thermal applications. International Journal of Heat and Technology, 39(1), 165–172. https://doi.org/10.18280/ijht.390119

3. Surakasi, R. T.,  (2021). Evaluation of physico-thermal properties of solar thermic fluids dispersed with multi-walled carbon nanotubes and prediction using artificial neural networks. Journal of Nanomaterials, 2021, 8897426. https://doi.org/10.1155/2021/8897426

4. Surakasi, R. T., (2021). Evaluation of physico-thermal properties of silicone oil dispersed with multi-walled carbon nanotubes using artificial neural networks. Journal of Nanomaterials, 2021, 7783953. https://doi.org/10.1155/2021/7783953

5. Surakasi, R. T.,  (2022). Investigation on weight fraction and alkaline treatment effects on catechu, hibiscus cannabinus, and sansevieria fiber-reinforced epoxy hybrid composites. Advances in Materials Science and Engineering, 2022, 5418927. https://doi.org/10.1155/2022/5418927

6. Surakasi, R. T., (2022). Chlorella protothecoides algae oil blends with alcohols and Al₂O₃ nano-additives for emission reduction in CI engines. Journal of Nanomaterials, 2022, 6237849. https://doi.org/10.1155/2022/6237849

7. Surakasi, R. T.,  (2022). Environmental emission analysis of diesel, biodiesel, algae oil, and nano-metal additives in compression ignition engines. Journal of Nanomaterials, 2022, 7719462. https://doi.org/10.1155/2022/7719462

8. Surakasi, R. T.,  (2022). Evaluation of physico-thermal properties of TiO₂–water mixtures dispersed with MWCNTs. Nanotechnology for Environmental Engineering, 7, 409–420. https://doi.org/10.1007/s41204-022-00158-612.

9. Surakasi, R. T.,  (2022). Nanometal-based magnesium oxide nanoparticles blended with Chlorella vulgaris algae biodiesel for diesel engine applications. Journal of Nanomaterials, 2022, 8843167.https://doi.org/10.1155/2022/8843167

10. Surakasi, R. T., (2022). Investigation on forestry wood wastes: Pyrolysis and thermal characteristics of Ficus religiosa for energy recovery systems. Advances in Materials Science and Engineering, 2022, 9147826. https://doi.org/10.1155/2022/9147826

11. Surakasi, R. T., (2022). Mechanical behavior of alkali-treated fabric-reinforced polymer matrix composites. Advances in Polymer Technology, 2022, 6284179.
https://doi.org/10.1155/2022/6284179

12. Surakasi, R. T.,  (2022). Mechanical behavior of aluminum and graphene nanopowder-based composites. International Journal of Chemical Engineering, 2022, 7936408. https://doi.org/10.1155/2022/7936408

13. Surakasi, R. T.,  (2022). Investigation of curing mechanisms and mechanical properties of polypropylene/aliphatic epoxy composites. Advances in Polymer Technology, 2022, 4689274. https://doi.org/10.1155/2022/4689274

14. Surakasi, R. T., (2022). Liquid fuels derived from microalgae: Physicochemical analysis. Journal of Engineering, 2022, 5582391.
https://doi.org/10.1155/2022/5582391

15. Surakasi, R. T., (2022). Optimization of metal nano-calcium oxide-based biodiesel production using process simulation. Journal of Engineering, 2022, 6871452. https://doi.org/10.1155/2022/6871452

16. Surakasi, R. T., (2022). Effect of compression molding parameters on mechanical properties of MWCNT/glass fiber/epoxy composites. Advances in Polymer Technology, 2022, 5728194. https://doi.org/10.1155/2022/5728194

17. Surakasi, R. T., (2023). Synthesis and mechanical properties of graphene nanoparticle-reinforced aluminum alloy matrix composites. Nanotechnology for Environmental Engineering, 8, 27–38. https://doi.org/10.1007/s41204-023-00171-8

18. Surakasi, R. T., (2023). Influence of SiO₂ filler addition on shear fracture toughness of hemp fiber-reinforced epoxy composites. Journal of Nanomaterials, 2023, 3719642. https://doi.org/10.1155/2023/3719642

19. Surakasi, R. T., (2023). Optimization of nano-SiO₂/banana fiber hybrid composites using Taguchi and artificial neural network approaches. Journal of Nanomaterials, 2023, 4821965. https://doi.org/10.1155/2023/4821965

20. Surakasi, R. T., (2023). Emissions and performance of diesel engines correlated with biodiesel properties. Journal of Engineering, 2023, 8243157.
https://doi.org/10.1155/2023/8243157

21. Surakasi, R. T., (2023). Evaluation of electrical properties of graphene nanopowder-dispersed propylene glycol–water solutions. Engineering Research Express, 5(3), 035041. https://doi.org/10.1088/2631-8695/acf873

22. Surakasi, R. T., (2023). Statistical experimental analysis of wear and mechanical behavior of abaca/sisal fiber-based hybrid composites under cryogenic conditions. Frontiers in Materials, 10, 1214582. https://doi.org/10.3389/fmats.2023.1214582

23. Surakasi, R. T., (2023). Study on the photovoltaic panel using nano-CeO₂/water-based nanofluid. International Journal on Interactive Design and Manufacturing, 17, 1941–1952. https://doi.org/10.1007/s12008-023-01132-1

24. Surakasi, R. T., (2024). Effectiveness of natural dye adsorption on interlaminar shear strength and optical properties of bio-synthesized TiO₂ nanoparticle-reinforced flax fiber/epoxy composites. Discover Applied Sciences, 6, 45. https://doi.org/10.1007/s44296-024-00145-7

25. Surakasi, R. T., (2024). Emerging trends and global challenges in predicting thermal performance degradation of wind turbine gearbox systems. Journal of Thermal Engineering, 10(3), 652–664. https://doi.org/10.18186/thermal.1425632

26. Surakasi, R. T., (2025). The impact of nano-additives in corn oil biodiesel used in combustion engines and optimization using response surface methodology. Environmental Progress & Sustainability, 44(2), e14032. https://doi.org/10.1002/ep.14032

27. Surakasi, R. T.,(2025). Recent trends in the development and growth of solar technologies: A review. Journal of Thermal Engineering, 11(4), 921–940.
https://doi.org/10.18186/thermal.1569023 

Q3 Journals:

1. Surakasi, R. T., (2020). Ethylene glycol-based nanofluids: Estimation of stability and thermophysical properties. Frontiers in Heat and Mass Transfer, 14, 24. https://doi.org/10.5098/hmt.14.24

2. Surakasi, R. T., (2023). Characterization and evaluation of electrical properties of corn oil biodiesel mixed with nanoadditives. International Journal of Renewable Energy Research, 13(2), 843–852. https://doi.org/10.20508/ijrer.v13i2.13627.g8716

3. Surakasi, R. T. (2024). Emerging trends and global challenges to predict drop in thermal performance of wind turbine gearbox systems. Journal of Thermal Engineering, 10(3), 652–664. https://doi.org/10.18186/thermal.1425632

4. Surakasi, R. T., (2024). Response surface methodology investigation of the viscosity of propylene glycol (100)/graphene nanofluid to determine optimal conditions. Engineering Reports, 6(11), e12887. https://doi.org/10.1002/eng2.12887

Q4 Journals: 

1. Surakasi, R. T., (2019). Prediction of thermophysical properties of solar thermic fluids dispersed with carbon nanotubes using artificial neural networks. JP Journal of Heat and Mass Transfer, 15(4), 793–804. https://doi.org/10.17654/HM015040793

2. Surakasi, R. T., (2023). Investigation on the influence of MWCNT, Al₂O₃ and CuO nanofluids in evacuated tube solar collectors. Thermal Science, 27(6B), 5021–5033. https://doi.org/10.2298/TSCI230121173S

3. Surakasi, R. T. (2023). Examining the effects of load variation on the tribological behavior of a blended lubricant made from corn oil biodiesel. International Journal of Vehicle Structures & Systems, 15(4), 473–480. https://doi.org/10.4273/ijvss.15.4.08

4. Surakasi, R. T.,(2023). Economical speed test on a four-stroke single-cylinder diesel engine running on diesel mixed with chicken waste oil. International Journal of Vehicle Structures & Systems, 15(4), 481–487. https://doi.org/10.4273/ijvss.15.4.09

5. Surakasi, R. T., (2023). Corn oil biodiesel dispersed with nanopowder as a cutting fluid in CNC milling processes. International Journal of Vehicle Structures & Systems, 15(4), 488–495. https://doi.org/10.4273/ijvss.15.4.10

6. Surakasi, R. T., (2024). Nano-dispersed corn oil biodiesel: An analysis of its potential for usage in hybrid electric vehicles. International Journal of Vehicle Structures & Systems, 16(1), 35–42. https://doi.org/10.4273/ijvss.16.1.05

7. Surakasi, R. T., (2024). The combustion and emission characteristics of corn oil biodiesel with titanium oxide (TiO₂) nano-additive. Journal of Environmental Nanotechnology, 13(1), 9–16. https://doi.org/10.13074/jent.2024.03.2411

8.  Surakasi, R. T.,(2024). Evaluation of dielectric properties of peanut oil biodiesel mixed with nano-additives. Journal of Environmental Nanotechnology, 13(1), 17–23. https://doi.org/10.13074/jent.2024.03.2412

9. Surakasi, R. T.,(2024). Environmental effects of biodiesel engines fuelled by waste cooking oil and metal nano-additives. ITEGAM – Journal of Engineering and Technology for Industrial Applications, 10(43), 1–9. https://doi.org/10.5935/2447-0228.20240043

10. Surakasi, R. T.,(2024). The impact of nano-additives in corn oil biodiesel used in combustion engines on the environment: An experimental approach. ITEGAM – Journal of Engineering and Technology for Industrial Applications, 10(44), 1–10. https://doi.org/10.5935/2447-0228.20240044

11. Surakasi, R. T., (2024). Energy-efficient fused deposition modeling printing of sustainable polymers: Optimization strategies for material and process performance. Applied Chemical Engineering, 6(4), 187–195. https://doi.org/10.1007/s44172-024-00287-6

12. Surakasi, R. T., (2024). Integration of nanomaterials in fused deposition modeling for enhanced surface properties: Optimized manufacturing approaches. Applied Chemical Engineering, 6(4), 196–204. https://doi.org/10.1007/s44172-024-00288-5

13. Surakasi, R. T., (2024). Surface metamorphosis techniques for sustainable polymers: Optimizing material performance and environmental impact. Applied Chemical Engineering, 6(5), 225–234. https://doi.org/10.1007/s44172-024-00301-x

14. Surakasi, R. T., (2025). Combustion dynamics and flame propagation in natural gas and synthetic fuel blends: A detailed thermochemical analysis. Oxidation Communications, 48(2), 412–424. https://doi.org/10.17654/OC048020412

1.Surakasi, R. T.,(2019). Thermo-physical properties of solar thermic fluids dispersed with carbon nanotubes. In Proceedings of the International Conference on Advances in Mechanical and Materials Engineering (ICAMME 2019).

2. Surakasi, R. T.,  (2021). Investigation on tensile behavior of Al/Si₃N₄/sugarcane ash particle-reinforced friction stir processed composites. Materials Today: Proceedings, 45, 5604–5609. https://doi.org/10.1016/j.matpr.2021.01.412

3. Surakasi, R. T., (2022). Mechanical and tribological properties of TiC nanoparticle-reinforced polymer matrix composites. Materials Today: Proceedings, 50, 2043–2048. https://doi.org/10.1016/j.matpr.2021.10.338

4. Surakasi, R. T.,  (2022). Mechanical behavior of nano-ceramic particle-reinforced aluminum matrix composites. Materials Today: Proceedings, 50, 2019–2024. https://doi.org/10.1016/j.matpr.2021.10.334

5. Surakasi, R. T.,  (2022). Impact of twisted tape inserts on water temperature enhancement in solar water heaters. Materials Today: Proceedings, 52, 1759–1764. https://doi.org/10.1016/j.matpr.2021.12.238

6. Surakasi, R. T., (2022). Freeze–thaw behavior of nanofiller-modified concrete composites. Materials Today: Proceedings, 52, 1845–1850. https://doi.org/10.1016/j.matpr.2021.12.251

7. Surakasi, R. T.,  (2022). Fatigue strength enhancement of nanoreinforced adhesive joints. Materials Today: Proceedings, 52, 1867–1872. https://doi.org/10.1016/j.matpr.2021.12.256

8. Surakasi, R. T.,  (2022). Comparative investigation and optimization of turning parameters in machining Inconel 718 using the Taguchi technique. Materials Today: Proceedings, 52, 1879–1884. https://doi.org/10.1016/j.matpr.2021.12.260

9. Surakasi, R. T.,  (2022). Sustainable manufacturing in turning of Inconel 718 using uncoated carbide inserts. Materials Today: Proceedings, 54, 134–139. https://doi.org/10.1016/j.matpr.2021.12.491

10. Surakasi, R. T., Kumar, V., & Reddy, S. P. (2025). Improving photothermal conversion efficiency in paraffin using Cu–CuO hybrid nanofluids. In AIP Conference Proceedings 3158, 020014 (ICITMSEE’24).
https://doi.org/10.1063/5.0198742

11. Surakasi, R. T., Kumar, V., & Reddy, S. P. (2025). Impact of silicon nanoparticles on the mechanical properties of sisal/flax fiber-based polymer hybrid nanocomposites. In AIP Conference Proceedings 3158, 020021 (ICITMSEE’24). https://doi.org/10.1063/5.0198756

12. Surakasi, R. T., Patel, R., & Singh, S. (2025). Thermal performance enhancement of a flat plate collector using SiO₂–CuO/water hybrid nanofluids: An exergetic and economic perspective. In AIP Conference Proceedings 3158, 020028 (ICITMSEE’24). https://doi.org/10.1063/5.0198769

13. Surakasi, R. T., Patel, R., & Singh, S. (2025). Mechanical enhancement of epoxy hybrid composites via SiO₂ nanoparticle integration. In AIP Conference Proceedings 3158, 020031 (ICITMSEE’24).
https://doi.org/10.1063/5.0198775

14. Surakasi, R. T., Kumar, A., & Verma, P. (2025). Titanium carbide coating for corrosion protection of graphite in proton exchange membrane fuel cells. In AIP Conference Proceedings 3201, 030012 (ICONNECT-2024). https://doi.org/10.1063/5.0213472

15. Surakasi, R. T., Kumar, A., & Verma, P. (2025). Efficiency optimization of a tubular solar still using nano-enhanced PCM and ZnO-coated basin strategies. In AIP Conference Proceedings 3201, 030018 (ICONNECT-2024). https://doi.org/10.1063/5.0213485

16. Surakasi, R. T., Kumar, A., & Verma, P. (2025). Enhanced performance of single-sloped double-basin solar stills using ZrO₂ nanoparticles: An experimental investigation. In AIP Conference Proceedings 3201, 030022 (ICONNECT-2024). https://doi.org/10.1063/5.0213493

1. Associate Member of the Institute of Engineers

2. Life Member of ISTE

3. Life Member of IAENG

1. Authored textbook titled "Fundamentals of Fluid Dynamics" by AGPH Publishers, available at Flipkart, Amazon

2. Authored textbook titled "Wind Energy Conversion System" by SIPH Publishers, available at Flipkart, Amazon

3. Authored textbook titled "Nuclear Energy Concepts and Fundamentals" by SIPH Publishers, available at Flipkart, Amazon

4. Authored textbook titled "Thermal Engineering" by SIPH Publishers, available at Flipkart, Amazon

5. Authored textbook titled "Gas Dynamics and Jet Propulsion" by SIPH Publishers, available at Flipkart, Amazon

6. Authored textbook titled "Finite Element Analysis" by SIPH Publishers, available at Flipkart, Amazon